Introduction
Angle: 90 degrees
Match: 4MM lens
Diameter: 16MM
Height: 8.6MM
Lens material: optical grade PMMA
Support material: PC material
Temperature resistance: -40-+100 degrees
1. Product description: The surface is flat matte, with the words 4MM engraved on both sides of the edge. The engraved millimeters make the product more clearly identifiable, and it is not easy to be confused when matching.
The three pillars at the bottom are used to locate the matching of LED and lens, and effectively solve the problem of 5050 LED card position;
2. Specially designed for low-power infrared 5050 LED, the utilization rate of the light emitted by the LED can reach 90% Above (3MM light transmittance is 93%);
3. It is professionally designed to match the infrared surveillance lens 4MM, 6MM, 8MM specifications, so that the infrared light spot and the visual range of the monitoring screen are effectively unified without vignetting.Full surface frosted series;
4. All designed for smooth and clean face, small size, saving internal space, and better matching with 75, 60, 50 small light boards;
5. The size and angle of the same specification are: 45 degrees, 60 degrees and 90 degrees to choose from;
6. This product adopts high-precision aspheric optical design, imported mold steel, and uses original imported optical acrylic (PMMA) raw materials from Japan Mitsubishi to ensure sufficient
Injection molding time, reduce product shrinkage rate, all products have passed SGS certification and ROHS environmental protection.
Application:
It is widely used in infrared surveillance products such as infrared array cameras and infrared dome cameras.
Match: 4MM lens
Diameter: 16MM
Height: 8.6MM
Lens material: optical grade PMMA
Support material: PC material
Temperature resistance: -40-+100 degrees
Applicable infrared LED: 5050 infrared LED
1. Product description: The surface is flat matte, with the words 4MM engraved on both sides of the edge. The engraved millimeters make the product more clearly identifiable, and it is not easy to be confused when matching.
The three pillars at the bottom are used to locate the matching of LED and lens, and effectively solve the problem of 5050 LED card position;
2. Specially designed for low-power infrared 5050 LED, the utilization rate of the light emitted by the LED can reach 90% Above (3MM light transmittance is 93%);
3. It is professionally designed to match the infrared surveillance lens 4MM, 6MM, 8MM specifications, so that the infrared light spot and the visual range of the monitoring screen are effectively unified without vignetting.Full surface frosted series;
4. All designed for smooth and clean face, small size, saving internal space, and better matching with 75, 60, 50 small light boards;
5. The size and angle of the same specification are: 45 degrees, 60 degrees and 90 degrees to choose from;
6. This product adopts high-precision aspheric optical design, imported mold steel, and uses original imported optical acrylic (PMMA) raw materials from Japan Mitsubishi to ensure sufficient
Injection molding time, reduce product shrinkage rate, all products have passed SGS certification and ROHS environmental protection.
Application:
It is widely used in infrared surveillance products such as infrared array cameras and infrared dome cameras.
0769-82865682